 |
|
|
| |
 |
If you're about to use a TDS9092 computer
for the first time, a Starter Pack is the best place to begin.
It contains most of the things you need for your application development.
|
TDS9092SP Starter Pack. Point to each item on the picture
for part numbers and information
|
There are two versions of the
Starter Pack:
l TDS9092SP is based on the TDS9092-PIN computer
l TDS9092SP-PLUG uses the TDS9092-PLUG which
fits in a rack
Suggested first order
These Starter Packs contain almost everything to start work on
a prototype.
l TDS9092-PIN or TDS9092-PLUG
l TDS-PC for Windows CD with development
system, software library, website and other useful material
l RAM32K to hold compiled code during development
l TDS9092TM Technical
Manual (275 pages)
l DS1213C makes
RAM non-volatile so you can try stand-alone system without blowing
an EPROM
l PINSOCKETSET (TDS9092SP)
or SOCKETDIN64 (TDS9092SP-PLUG) sockets for the prototype
development |
What you need
As well as a Starter Pack you'll
need a PC with a minimum specification.
Normally you will also need a PROM programmer. You
will also need a cable to connect your TDS9092 computer to
a serial port on the PC. This can be a simple 3-wire cable
for communication with the TDS9092 (see Technical Manual
for Fast Start Guide),
but may need to be a full serial cable for downloading PROM
programmer files from the PC, depending on the type of programmer
you use. |
Optional extras
You may want to add further items to your Starter Pack,
here are some suggestions:
l UPDATE-SERVICE brings
a yearly subscription for all that's new.
l 27C256 is
a 32k byte dual-in-line EPROM |
|
| |
|
|
