 |
|
|
 |
TDS2020CM2NE
datalogging adapter with no ejector.
This PCMCIA adapter sits on top of a TDS2020F board
to form a dataloggger module. Its main use is in conjunction
with the TDS2020CFA Compact
Flash converter to connect Compact Flash cards. The edge
of the CF card is flush with the front of the board.
l Low current because of on-board switched mode
power supply
l software
can completely power down a Compact Flash card, not just
put it into standby
l hot-swap cards
There are also these alternatives:
(there is no version for the TDS2020F-PLUG).
Picture
for illustrative purposes only |
|
|
|
