Connect any serial port to an ethernet Local Area Network

The Vlinx model ESP901 Ethernet serial server connects RS-232, 422, 485 serial devices to an Ethernet LAN/WAN.

A virtual COM port on a PC (software supplied) establishes a connection with the Ethernet to Serial module. This in turn will allow communications with the connected serial device in the same manner as a device connected to the COM port on a PC. The LAN becomes transparent to the serial device and the software running on the PC.

Compile TDS2020F (or TDS9092) source code over your LAN, or use the Ethernet connection to upload data from a TDS2020F-based instrument or datalogger.

• One 10/100 Mbps Ethernet RJ-45 connection (10BaseT or 100BaseTX)

• One asynchronous DB-9 (male) DTE serial port RS-232, RS-422, or RS-485 serial interface

• TCP or UDP

• Client or Server.

• Virtual COM mode with drivers for Window NT/98/ME/2000/XP

• Direct IP mode

• Reliable communications connection even after temporary loss of a hardware connection

• Data Rate: 110 bps to 230.4k bps

• Protocols: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP

• Power Requirements: 12 VDC @ 200 mA (adapter supplied)

• Dimensions: 8.5 x 11.5 x 2.3 cm (3.35 x 4.5 x 0.90 in)

Picture for illustrative purposes only